fibaro keyfob

Fibaro KeyFob

The FIBARO KeyFob is a compact, battery-powered, Z-Wave Plus compatible remote control. Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.

Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs. Built-in locking system will ensure that unauthorized person will not take control of your home.

KeyFob was designed with precise attention to detail. Its ergonomic and compact shape allow it to fit perfectly in your hand, and pocket, while raised buttons allow for intuitive clicking.

Each button press responds to an option of 1, 2 or 3 clicks and holding a button down.That’s a total of up to 24 possibilities.

To set up for the six sequences use combination of 2 to 5 buttons. This gives a total of 30 possible actions.

KeyFob’s modern design is only the first layer of its perfection. Inside the device lies the most advanced electronic technology developed by FIBARO engineers to meet and exceed all possible smart home challenges.

KeyFob comes with a fully configurable, automatic pin lock that effectively protects against accidental clicks or unauthorized use.

Control the lights, turn on the music, manage temperature, close the blinds and gates and open the door. Run virtually any KeyFob devices and scenes you desire.

Upon arriving home, KeyFob can effortlessly open the garage, light up the driveway for your safety and comfort, and disarm the alarm in your home.

Each of these actions can be triggered independently or with a single click that can launch the whole sequence of actions as one particular scene.



fibaro button

Fibaro Button

The FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.

The Button allows you to manually activate and deactivate any both electrical device of your choice as well as actions within the FIBARO system. From something as simple as lighting a bulb to complex sequences.

The Button is one of the world's most handy devices of its kind. It suits your palm perfectly and it can be placed virtually anywhere.

Place it to one spot and simply move it somewhere else if needed - no wires required!

The Button recognizes up to 6 different actions. One click can turn off the light, two clicks can activate the AC unit, and holding the button down can trigger a customized scene.

Press The Button and the system can turn off the lights, lock the doors, and set the alarm, all in one simple action... In the morning, a simple press can make your house rise and shine again.



fibaro swipe

Fibaro Swipe

The FIBARO Swipe is a revolutionary battery powered gesture-control pad that provides control over home automation devices within the Z-Wave smart home ecosystem without actually touching a gesture to a command. The placement and possibilities of the FIBARO Swipe are truly endless. Imagine swiping up to open the roller shades, swiping down to turn off the lights, swiping right and the music comes on, swiping left to turn the TV on. With four short swipes, the living room is transformed into a home theater! Swipe’s only limit is your imagination. Installed device perfectly matches your interior design, as it resembles a picture frame. You can even personalize it with your favourite picture. Gesture controlled menu allows to add/remove or reset the device without dismantling it.

With the wave of your hand you can change the colour of the LED strips. You can also control the heating and air conditioning temperature settings. The high resolution sensor interprets the most complex commands. You will be surprised by the power of your hands and how intelligent the SWIPE is.

The FIBARO Swipe is equipped with the most precise 3D motion detecting sensor of its kind, which ensures flawless recognition of the performed gestures. This new, innovative way of controlling home automation devices is not just spectacular, but above all, intuitive and user friendly.

When displayed, SWIPE can be used as a beautifully designed picture frame and allows you to easily change photos whenever you want. It takes just a moment to remove the front panel and you can relive the memories that bring a smile to your face.



remotec

Remotec

The Z-Wave Remotec Scene Master is a Z-Wave controller which can trigger actions and predefined scenes in a Z-Wave control center. The device has 8 single buttons and a status LED.

The Scene Master will be distributed with wall mount where it can be took out for use as portable remote control.

When one of the buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller.

The ZRC-90 is a great solution for triggering events more quickly than taking out your smart-phone and running a home control app.

The scene master is ideal for kids, elderlies and guests who may not have full access your to your smart home's mobile application.

With a convenient snap-in wall mount, the ZRC-09 can also be removed to keep it handy while you go about your home for the ultimate in simple convenience.



aeotec keyfob

Aeotec KeyFob

The Aeotec Key Fob is a fully functional Z-Wave remote controller, which can include, exclude and control the other Z-Wave certified devices. It also can be acted as a secondary controller in a network.

It has a four button design and you can use each button to control Z-Wave devices in your home and build a Z-Wave network for them. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

The Aeotec KeyFob features all the functionality of larger Z-Wave remote controls but packed into a small pocket-sized device that you can take anywhere. The Keyfob can be set up as the primary controller of a Z-Wave network or as an additional (secondary) Z-Wave controller - it's perfect for additional, portable control in an existing Z-Wave network.

The KeyFob may only have four buttons but it can be used in a variety of ways:

Direct control of multiple devices with a single button Direct activation of up to eight scenes




Copyright Yorkshire Automation 2017
instagram
twitter
facebook