dimmer 2

Fibaro Dimmer 2

Fibaro Z-Wave Dimmer insert module retrofits into an existing light switch enabling you to wirelessly control lights. The new Dimmer 2 is a true universal dimmer - automatically selects the most suitable dimming type (trailing-edge or leading-edge) based on the bulb type used. It measures the power being used and reports that to the Z-Wave system and it is fully Z-Wave Plus certified - offering increased range, extended battery life and Over The Air upgrading (OTA).

Using the unique, specially designed algorithm, Dimmer 2 recognizes the type of a connected light source and calibrates itself to set proper values. Now you can be sure that lights in your home are controlled in the optimal way.

The Dimmer 2 is designed in such a way that it can be used in both 2 and 3 wire electrical systems. It may be used as a switch with non-dimmable light sources (in 3-wire connection) so you can use it in older electrical systems as well. Also, the Dimmer 2 incorporates a number of security features protecting the device from overheating, overload and voltage drop. Should any of these happen, you will be notified immediately.

The new Dimmer 2 features power metering functionality. You can view the energy consumption of your home in clear charts and graphs, and use it to reduce your monthly bills.

Dimmer 2 offers an extremely intuitive scene management. The device will turn one of the light switch buttons into a scene trigger. Activating a selected scene becomes as simple as turning the light on. Just press the button while entering the room!



bypass 2

Bypass 2

The Dimmer Bypass enables the Fibaro Dimmer 2 module to control lamps which have a power of less than 50W. It is ideal for use with low-power LED lamps.

The Fibaro Dimmer 2 and Dimmer Bypass can only be used with lamps that are 'dimmable'. Before buying this product, please confirm that your lamp can be dimmed.



relay switch single

Relay Switch Single

Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate an electric device up to 10A. Fibaro On/Off Relay Switch can switch on or off connected device either through radio waves or through the wall switch connected directly to it.

Each Fibaro System module is only 42.5 mm long, 37.0 mm wide and 15.9 mm high, which makes them the world’s smallest devices of this type. Some other advantages of the Fibaro System include neat appearance, reliability and perfection.

Single relay switch capable of operating a load of up to 2.5KW (10A).
Controlled through other Fibaro devices or any Z-Wave controller
The smallest device of this type in the World!
Can use mains or alternative power supply for load (including DC)
Works with AC power supply only (110-230V AC)
Second switch input for controlling additional associated devices or 2-way installation



relay switch dual

Relay Switch Double

Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of combine current up to 10A. Fibaro Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to it.

Each Fibaro System module is only 42.5 mm long, 37.0 mm wide and 15.9 mm high, which makes them the world’s smallest devices of this type. Some other advantages of the Fibaro System include neat appearance, reliability and perfection.

Double relay switch capable of operating two independent loads of up to 1.5KW (6.5A) each.
Controlled through other Fibaro devices or any Z-Wave controller
The smallest device of this type in the World!
Independent control of two separate loads (1.5KW / 6.5A each)
Maximum load per channel: 6.5A (1.5Kw)
Maximum total load: 10A
Can use mains or alternative power supply for load (including DC)
Works with AC power supply only (110-230V AC)



single switch 2

Single Switch 2

Single Switch 2 was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills.

Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!

Single Switch 2 is equipped with sockets that have an increased cross-section which allows you to connect it to wires with a larger diameter and simplify the installation process.

A built-in RGB diode is of invaluable assistance during the installation process. The light will show whether Single Switch 2 has been added or removed from the network. You can also see whether a calibration or an update was successful.

Single Switch 2 features many safety measures that prevent it from voltage drop, overheating, or overcharging. In the case of any of these events, the system will immediately send you a notification.

Single Switch 2 allows you to monitor electrical devices that are currently inactive. The system will notify you if you leave a device running and allow you to turn it off remotely.

The new Single Switch 2 allows you to measure the power and energy of the connected load. You can see how much energy is used in your home through clear charts and use that information to reduce your electricity bills.



double switch 2

Double Switch 2

Double Switch 2 was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills.

Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!

Double Switch 2 is equipped with sockets that have an increased cross-section which allows you to connect it to wires with a larger diameter and simplify the installation process.

A built-in RGB diode is of invaluable assistance during the installation process. The light will show whether Double Switch 2 has been added or removed from the network. You can also see whether a calibration or an update was successful.

Double Switch 2 features many safety measures that prevent it from voltage drop, overheating, or overcharging. In the case of any of these events, the system will immediately send you a notification.

Double Switch 2 allows you to monitor electrical devices that are currently inactive. The system will notify you if you leave a device running and allow you to turn it off remotely.

The new Double Switch 2 allows you to measure the power and energy of the connected load. You can see how much energy is used in your home through clear charts and use that information to reduce your electricity bills.



rgbw

RGBW

The Fibaro Z-Wave RGBW Controller enables you to bring multi-colour LEDs to life, allowing them you to have just the right light effect for your mood.

The Fibaro RGBW Controller is a unique, advanced wireless 4-colour LED strips controller. As well as supporting the traditional RGB channels, it also supports the additional white light channel - allowing an infinite variety of pastel colours. The controller also provides dimming control of four LED channels and can take input from up to four analog sensors.

Fibaro RGBW Controller controls three as well as four colour LED strips giving you milions of colours of light.

Fibaro RGBW Controller has four analogue inputs supporting any sensors, e.g. light sensors, wind sensors, pressure sensors and potentiometers operating within 0-10V range.

Four output channels allow for connecting and independently controlling each of connected light sources.

An intuitive interface from Fibaro for your Smartphone or tablet allows you to choose your favorite colour for each lighting zone. Favorite colour bar will change colouring in a living-room or child’s room like a touch of magic wand. Lighting programs slider will help you relax starting calming pastel colour transitions, harmonizing with music playing in the background. There’s a magic ball as well, letting you choose any colour you wish. You are a wizard of your well-being.

Fibaro designed four lighting scenes with amazing animation. Immerse yourself in an atmosphere of love and warmth with light simulating lit fireplace, or feel the magic of inspirational morning in the colors of the morning dawn. Recall memories of warm summer weather storms and check the unique magic of colours in the a simulation of a storm. All dangerous situation detected by Fibaro system will be additionally enhanced by visual effects, particularly desirable for the hearing impaired.

Your intelligent house reacts to anything happening around and informs you about it with colors of light. Use Fibaro RGBW Controller not only to arrange interior lighting schemes but also to inform you about any event you can imagine. Thanks to four analogue inputs, Fibaro RGBW Controller may be connected to four independent analogue sensors operating in 0-10V range. Use analogue sensors support to create bathtub illumination informing of water temperature with a colour. Adapt living-room lighting to conditions outside. Help your Fibaro Home Center decide whether to start garden watering depending on signals coming from soil moisture sensors and light intensity sensors.

Fibaro RGBW Controller allows for managing four independent light channels. It’s the world’s only wireless controller allowing for dimming up to four connected light sources independently. RGBW Controller’s versatility ensures correct operation of 12V and 24V light sources as well, without any modifications. This way you don’t have to observe the voltage of connected light sources.



swiid

Swiid

The SwiidInter Cord Switch is a Z-Wave ON/Off switch that replaces your existing corded switch. It can be turned On/Off like a manual switch or be controlled wirelessly by Z-Wave. It can also be used to directly control other Z-Wave devices on your home automation system.

Lamp Control|
The SwiidInter Cord switch, is installed into the lamp's cable, replacing any existing cable switch. You can then control the lamp wirelessly via your Z-Wave system, or you can manually control the lamp by pressing the SwiidInter's button. This is ideal for any type of lamp up to 660W.

Z-Wave Control of other Devices - Scene Control
The SwiidInter Cord switch features instant status updates which means that each time the lamp is switched On or Off this is immediately reported to the Z-Wave controller. You can use this to trigger a scene that can then control many devices, start a timer or even send you an alert. Associated Devices
The Cord switch has two Association groups, each of which can be associated with up to five other Z-Wave devices. This means that the Cord Switch can be used to control other Z-Wave devices such as On/Off switches, dimmers etc - all from the touch of the SwiidInter's button. The association groups are controlled with a short (group 2) or a long (group 1) press of the SwindInter's button.

Being able to easily control scenes or other Z-Wave devices make the SwiidInter Cord Switch extremely versatile in controlling local (wired) lamp as well as lots of other devices and events in your system.




Copyright Yorkshire Automation 2017
instagram
twitter
facebook