Fibaro Heat Controller
Fibaro Radiator Thermostat is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjust the heat level. This intelligent thermostatic head allows you to control the temperature in the room manually or remotely (within the scopes of 10-30° and 16-24° C accordingly), using the in-built or external sensor and regulating the heat level automatically, according to your individual preferences. Every time the temperature increases, the illuminated ring around the head changes its colour.
The device automatically adjusts the heating intensity to the existing conditions among others thanks to the temperature sensor it is equipped with. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via Fibaro app to easily manage temperature troughout the week. With additional Fibaro Radiator Thermostat Temperature Sensor it is even more precise in adjusting the right temperature in your home.
NOTE: Recommended for horizontal mounting only, unless used with the optional temperature sensor!
Fibaro Temperature Sensor is an external, wireless temperature sensor. By placing it anywhere you like, you will ensure the perfect temperature where you are. It can serve as a point of reference for up to three thermostatic heads at once.
Fibaro decentralizes the heating process! Instead of a single controlling device, it offers intelligent thermostatic heads cooperating with one another, which you can install in any number of radiators.
No other controller offers such level of heating comfort and such an array of possibilities.
The LED illuminating ring lights up once you place your hand near it, to show the colour corresponding to the current temperature. Thanks to that, you will be able to evaluate the situation immediately and intuitively set the perfect temperature.
Small size and highest quality design make it easy to use and enjoy its beauty. The Fibaro Thermostatic Head looks incredible and fits in your hand perfectly when you want to change the temperature. And the tiny pastille, which is the Fibaro Temperature Sensor can be easily and safely place wherever you want in the room.
This device is a Z-Wave controlled electronic radiator thermostat. It is SDK 4.5, has Explorer Frame Support and increased network stability.
This radiator thermostat is mounted on wall heating valves and controls them by a motor. The device accepts a setpoint that is either set manually using buttons on the device or wirelessly using Z-Wave. Afterwards, the device will regulate the warm water supply to the wall radiator and compare the detected temperature to ensure that the temperature in the room is kept at the desired level. A small LCD panel on the device displays the setpoint temperature on request.
The device has an internal scheduler, that allows to define up to 9 setpoint for up to 7 week days. Once programmed, these setpoints will be activated without any further manual or wireless interaction. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection and intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
Compared with Danfoss "Living Connect" the Popp thermostat will report the room temperature as detected and calculated by the device’s temperature sensor to the Z-Wave gateway.
The living connect can be mounted to valves with standard M30x1.5 connector or RA2000
New 2014 Version - 014G0013
The Danfoss living connect is a Thermostatic Radiator Valve (TRV) that can be controlled by a Z-Wave network controller.
The battery-powered thermostat is easily fitted to most radiator types in just a few minutes, it can be controlled wirelessly via the Z-Wave network or manually using the unit's three buttons.
The thermostat works by opening/closing its valve based on its Setpoint temperature. The Setpoint temperature can be set by the central controller via Z-Wave or manually by pressing the Up and Down buttons on the unit itself.
Note: The Danfoss radiator thermostat cannot reports its local temperature to the Z-Wave network, it only allows a one-way communication to change its setpoint.
This is the new 014G0013 version - it is based on the latest Z-Wave v4.5 SDK and features increased network stability.
The Brighter Way to Save Energy
The new Nest Learning Thermostat
A thinner, sleeker design. A bigger, sharper display. Hot water control. The 3rd-generation Nest Thermostat is more beautiful than ever.
With Farsight, it shows you the time or the temperature you've set from across the room. And the Nest Thermostat saves energy*. That's the most beautiful part.
Your thermostat controls 60% of your energy bill. So shouldn't it help you save energy? The Nest Thermostat does. Since 2011, it's saved over 8 billion kWh of energy in millions of homes worldwide.
Because it learns from you. It gets to know the temperature that you like while you're at home. And turns itself down when you're away. It even learns how your home warms up or how draughty it is, so it only uses the energy that it needs.
The Nest Thermostat now has a ring to fit any home’s style. Choose copper to add a warm touch. Stainless steel is perfect for a classic, versatile look. Black blends in with dark walls and stylish decor. And white looks great in simple, modern homes.
The Secure Wall Thermostat and Receiver set is designed to control hot-water heating systems and floor heating installations. It includes the Secure Wall Thermostat, which can be installed in the room to be controlled and the Secure Boiler Receiver to operate the hot water boiler. The thermostat can be manually operated by the user or remotely operated via Z-Wave to set the desired temperature.
The battery operated wall thermostat enables you to set the temperature of the room it is located in. When this temperature is reached, the thermostat instructs the Boiler Receiver (via Z-Wave) to switch the boiler on or off.
The unit’s LCD displays the target room temperature and by pressing the ‘temperature setting dial’ it will display the actual room temperature. It can also be operated using any Z-Wave remote or central controller.
The Z-Wave controlled relay switch controls the water boiler and can operate loads of up to 3A. It includes manual On/Off buttons and LEDs to indicate the boiler's current state.
Heat iT Underfloor Controller
The Heatit Z-Wave thermostat allows you to wirelessly control your electric underfloor heating. It is a wall-mounted thermostat that can control underfloor heating of up to 16A and work within a Z-Wave home automation system such as Fibaro, Vera, Zipato and many more.
The thermostat's LCD will display ambient temperature, either in the room or in the floor. The thermostat is equipped with sensitive cap sense buttons - by lightly pressing the buttons, the display will show the setpoint value.
Heatit Z-Wave includes a single-pole switch capable of handling loads up to 16A/3600W at 230V. It can be used with two external temperature sensors.